|

|
|
For video producers, TV stations, agencies, manufacturers
& compressionists |
|
 |
|
|
|
Smart Nickel Metal Hydride (NiMH)
Battery Belt and Charger
12 Volt (114 Watt/hour)
for industrial/broadcast video and other uses
Battery Belt model NiMH1295 Price $310. CDN
Smart Charger model Mascot 2415 Price
$180. CDN or
Smart Charger model Mascot 2215
Price $150. CDN
Ideal for powering 12 Volt lights for video & television or
other devices (powers 50 Watt light for just over 2 hours).
|
This NiMH battery is twice
the energy density by weight compared to Lead Acid chemistry.
|
- High energy (114 Watt/hours)
- Lower weight (4.63 pounds or 2.1 Kg)
- Energy density of 54.28 Wh/Kg including case
- Very competitive pricing
- Fast smart charging (3-4 hours)
- Charges anywhere in the world
- Intuitive and easy to use
- Long lasting quality cells
- Plenty of safety built in
|
Features & Specifications:
Power Capacity
114 Watt/hours (based on 23 Watt draw rate).
That is 9.5 Amp/hours (9,500 mAh typical
maximum, minimum 9 Amp/hours) at nominal 12 Volts. |
Instructions & Specs
>> Battery
operating instruction & specifications |
Weight
Only 4.63 pounds (2108 grams) + belt. |
Batteries
Uses premium quality Saft
brand French NiMH battery cells
for high energy density (67.85 Wh/Kg not including packaging), very low weight (about half the
weight of lead acid batteries) & long life.
NiMH cells have no memory problems, have
high current discharge (up to 10 Amps) &
is much more environmentally friendly than NiCad batteries. NiMH
batteries are more reliable & safer than Li-Ion, with a more consistence
Voltage level that is better suited to lighting.
>> Simple tech
specs (pdf) |
Safety
Plenty of safety built in (10 Amp internal
polyswitch self resetting breaker handles peaks up to 13 Amps,
thermostat, thermistor, smart charger features, heavy duty
wiring, shock absorption case, etc). |
Belt & case
High impact ABS plastic case which has 5 cm (2") slot
on back of battery to feed your belt through, includes
adjustable nylon belt with quick snap (shown in picture above).
Size 1 1/2" thick (+ 1/4" bump on back for belt)
X 5 3/4" wide X 6 7/8" tall. |
Connector & cable
One 4-pin XLR professional video Neutrik
in-line power locking connector, on a 2' 10" (85 cm)
cable using heavy duty #14 gauge wire & high temperature
UL1015 insulation, with Velcro tie. Used for outputting
power as well as charger input. |
Charger Choices
Fast 3 stage AC/DC smart chargers, that use precision
digital switch mode efficiency & can be used anywhere
in the world (90-264 VAC, 50-60 Hz).
Only 1 fast charger is required whether you buy 1 or several
batteries, thereby saving cost. No need to carry the weight
of the charger all day because it is separate from the battery
belt.
Has both –dV & dT°C/dt (temperature sensing
device) for intelligent charger termination without overcharging
the battery + timer for safety. Switches automatically to
stage 2 (top-off charge), then to stage 3 (trickle maintenance
charge). These chargers are double insulated & meet CE
hospital environment requirements EN60601-1 for 2415
& 2215 (pdf).
|
Warranty
Includes one year warranty on parts & labour for manufacturing
defects (exclusive of shipping). |
Shipping
Shipping weight of battery belt & charger approximately
7.3 pounds (3310 grams). |
Compare
Comparison chart coming soon. |
Optional Pro to Consumer Cable $20.
An optional adaptor cable from male XLR to female cigarette
is available for those event videographers who need that type
of fitting. |
Prices
Battery Belt model NiMH1295 Introductory
Price $310. CDN (Regular
$410.)
Smart Charger model Mascot 2415 Price
$180. CDN
Smart Charger model Mascot 2215 Price
$150. CDN
For exact currency exchange rates accurate as of yesterday's
cheque rates, please check http://www.royalbank.com/travel/fxconvert.html |
Notes
A small 25 Watt (1.5 Amp) 6.4 hour smart DC/DC charger will
soon be available for charging from 10-30 VDC battery sources
in remote locations where you can't plug in to AC power mains
(Mascot model 2515 pdf).
How Batteries Work:
Technical information on several types of batteries and chargers. |
To order or for additional information, please call (519) 657-4505
or e-mail Doug Hembruff.
|