Despatch Photovoltaic Cell Furnace

Model CF SL 2014

Description: Despatch Furnace CF SERIES METALLIZATION FIRING FURNACE Model CF-SL 2014

This a low usage Despatch firing furnace for Photovoltaic Cells which was new in 2015. It was used for about 100 experiments lasting about 2 hours each in an R & D facility.

For highly efficient solar cells at the lowest possible cost use the Despatch model CF-SL

- Electrically heated, operates on 380 Volts, 3 Phase, 50/60 Hz. Transformer to operate on 460 volts is available.

- This is a production unit.

- Acurate temperature profile across the conveyor.

- Edge support for cells on conveyor belt provides more consistent heat without shielding by supports accross the cells.

- Burnout

- Firing temperature: 1,000 ºC

- Heater Capacity: 52.9 KW Total

- Heater Amps: 3.9 Amps/Bulb Furnace

- Largest Motor Amps: 4.0 Amps

- Total Motor Amps: 8.9 Amps

- Full Load Amps: 45.9 Amps

- Main Switch Amps: 100.0 Amps

- Main Switch S.C.I.R.: 25.0 KA

- ENCLOSURE S.C.C.R.: 5.0 KA

- Air Supply: CDA: 60-70 PSIG

Click on the following link for the CF-SL Specification Sheet:

http://www.despatch.com/pdfs/CFSeriesSinglelane.pdf