|
CALL OR EMAIL US WITH WHAT YOU HAVE TO SELL OR TRADE! |
|
All prices in $US...last update Aug 21, 2008 |
|
To navigate down this page for sub categories, click here: |
#97284 Pivot Polisher: Jensen pivot polisher with original box; $49. |
#97283 Collet Lift: Lift them off safely, only $10. |
#97275 Mainspring Winders: Set of K&D pocketwatch mainspring winders; $59. |
#97272 Crown Reamer: Crown reamer set in original box, nice condition, note it is missing #4 reaamer; $39. |
#97272X Balance Tack: Hold that balance complete suspending safely in the air, either to work on or for storage; $19. |
#97263X Combination Tool: Used to hold jewels/rollers in place while heating/setting, also functions well as a third hand, picture is a sample representation and actual tool might be slightly different; $10. |
#97261X Capillary Oilers: Set of two glass capillary oilers; $15. |
#97260 Undercutters: Nice set of balance screw undercutters from Marshall; $29. |
#97259 Stones: Lot of four assorted stones; $19. |
#97258 Stones: Lot of four assorted stones; $19. |
#97256 Watch Paper: Use this so you don't leave fingerprint/oils on parts, almost 1000 sheets; $15 |
#97254 Cannon Pinion Tightner: Needs a bit of cleaning up, otherwise good condition; $25. |
#97251X Jewel Pusher: Do it the safe way; $25. |
#97249 Bench Key: Revolving turret style with lock, largest size is about 1.05mm square; $19. |
#97248 Bench Key: Revolving turret style with lock, will do up to 18S pocketwatches; $29. |
#97246 Speciality Tweezers: #15A Swiss, used for cutting fine edges such as hairsprings, excellent tips; $19. |
#97239 Pocketwatch Bench Keys: Set of three double ended pocketwatch let down keys; $39. |
#97238X Sleeve Wrench: Ten prong pocketwatch sleeve wrench, no damage; $19. |
#97237 Cannon Pinon Remover: Plunger style, do it the right and safe way; $39. |
#97235X Mainspring Coiling Pliers: Speciality pliers used to form end of mainspring for the arbor; $29. |
#97228 Steel Ruler: Six inches long, inches and cm on one side, decimal equivilants on the other; $2. |
#97226 Bergeon Blade Holders: Lot of six Bergeon screwdriver blade holders, empty; $8. |
#97215 Movement Gauge: Plastic, does both American and Swiss sizes; $4. |
#97214X Movement Gauge: Plastic, does both American and Swiss sizes; $4. |
#97212 Burnisher: Small (about four inches long) steel burnisher; $10. |
#97210 Oil Cup & Oilers: Old wooden oil cup with agate well, plus six (although all black tips are different) oilers; $25. |
#97204X Hand Gauge: Quickfit hand gauge; $10. |
#97203X Balance Screw Undercutters: Ames style, $6. |
#97201 Wheel Gauge: Two sided wheel gauge with small increments of change; $39. Reverse side shown here . |
#97160 Hole Gauge: Swiss made by KK, this old brass tool is used (I think) for measuring hole diameters.....ranges from .25mm to 1.80mm, however note that the first three (.25, .45 and .50) tips are broken off. Otherwise in good condition; $25. |
#97159 Mirror: Dental mirror, for looking "around corners"; $1. |
#97158 Depthing Tool: In original fitted box, watch size; $49. |
#97154 Hand Vise: With wooden handle, vise is 1 1/4" wide, opens 3/4"; $10. |
#97152 Thickness Gauge: US made thickness gauge, a few have some minor bending; $2. |
#97151 Screwhead Files: Lot of two screw head files; $10. |
#97139 Bezel Tool: Factory Bulova tool for cleaning dried up cement from the inside of bezels, works on both wrist and pocketwatches; $19. |
#97137 Bow Pliers: Pocketwatch bow opening pliers, nice condition; $19. |
#97136 Lindstrom Pliers: Lot of three high quality pliers from Linstrom; $25/lot. |
#97132 Countersink Set: Set of countersinking tools, with pin vise holder; $29. |
#97124 Hammer: Old jeweler's hammer, 4 1/2" long; $10. |
#97123 Hammer: Old jeweler's hammer, 5 1/4" long; $10. |
#97122 Hammer: Old jeweler's hammer, 6" long; $10. |
#97119 Hammer: Old jeweler's hammer, 10 1/2" long; $10. |
#97118 Hammer: 8 1/2" long, fibre head is 1 1/4" diameter x 2 3/4" long; $15. |
#97117 Hammer: 10" long, wooden head is 1 1/2" diameter x 3" long; $15. |
#97116 Hammer: 12" long, wooden head is 2" diameter x 3 1/2" long; $15. |
#97107 Mainspring Coiling Pliers: Some wear of the finish, tips are good; $25. |
#97106 Glass Movement Cover: About 4 3/4" in diameter, 2 1/2" deep; $25. |
#97104 Glass Movement Cover: About 2" in diameter, 1 1/2" deep; $15. |
#97080 Loupe: This is the style that mounts to your eyeglasses, estimate 10K; $19. |
#97074 Pivot Gauge: Pivots can be measured on either sliding gauge, or by hole, very good condition; $39. |
#97067 Accutron Tester: Factory cell tester for Accutrons; $19. |
#97059 Hammers: Lot of two older hammers; $19. |
#97058 Rivet Blocks: Lot of two rivet blocks; $10. |
#97057 Rivet Blocks: Lot of two rivet blocks; $10. |
#97055 Jeweler's Saw: Older jeweler's saw, sorry no extra blades; $12. |
#97050 Stone Lot: Lot of four assorted stones/slips; $19/lot. |
#97047 Stone Lot: Lot of five assorted stones; $19/lot. |
#97046 Demagnetizer: Pass through style, 110V, nice condition; $25. |
#97015X Pegwood: Lot of pegwood; $6. |
#97013 Oilers: Lot of three dip style oilers and cup; $15. |
#97012 Oilers: Lot of five dip style oilers and cup; $19. |
 |
#97011 Mainspring Gauge: Older than me! Antique mainspring gauge; $25. |
#97010 Sleeve Wrench: Mosely 10 prong pocketwatch sleeve wrench, no damage; $19. |
#97004 Link Remover: Tool used for wristwatch strap link pin removal; $10. |
#97003 Link Remover: Tool used for wristwatch strap link pin removal; $10. |
#96086 Pivot Polisher: Marshall pivot polisher, with original box and instructions, mint condition; $49. |
#96081 Screw Extractor: Older brass model, in good condition; $39. |
#96072 Calipers: West German outside calipers, brass and aluminum; $2. |
#96071 Calipers: Quality calipers, in and out, with lock; $8. |
#96070 Calipers: Quality calipers, in and out, with lock; $8. |
#96069 Micrometer: Ames 0-8mm, spring loaded lever actuated, with platform, in nice condition but crystal is a bit yellowed; $25. |
#96065 Micrometer: Swiss made, slight finish wear but not damage, with original wooden storage box, 0-25mm; $19. |
#96064 Micrometer: German made, 0-10mm; $10. |
#96055 Clock Oil: One oz container of Nye clock oil, nearly full; $8. |
#96053 Stem Grease: Bottle of stem grease, 7/8 full; $8. |
#96050 Watch Oil: Elgin container of watch oil; $6. |
#96049X Rust Brush: Brass wire brush for rust removal without damaging material, new; $1 each or six pieces for $5.. |
#96048 Hand Broach Set: Used to hold hands firmly while broaching, one for pocket and one for wristwatch sizes; $29. |
#96046 Pivot Drills: Two lots of Mascot pivot drills, both are incomplete; $15/lot. |
#96042X Pin Vise: Push style pin vise from K&D, medium; $4. |
#96041X Pin Vise: Push style pin vise, small; $4. |
#96033X Alcohol Jar: A bit dirty and bit of surface rust, no cap, good section of wick; $8. |
#96026X Mainspring Gauge: Old brass (Dennison) mainspring gauge; $12. |
#96024 Movement Cover: Glass movement cover, about four inches in diameter; $19. |
#96010 Pocketwatch Pendant Tool: Pocketwatch pendant tool, marked 0, 6, 16 and 18S; $19. |
#96009 Brush Set: Lot of three small utility brushes; $4. |
#95987 Jewel Bezel Openers/Closers: In original container, no damage but some surface rust from poor storage, specially priced at $15. |
#95983 Oiler Set: Set of three NOS capillary oilers from Vigor; $25. |
#95948X Crown/Tap Gauge: Very useful gauge from Borel, measures crown size, tap size, waterproof tube size and band/spring bar size; $25. |
#95939 Broaches: Lot of assorted fine/very fine watch broaches; $19/lot. |
#95935 Hammer:
Eight inch long hammer, plastic head; $10.
|
#95909 Mainspring Winders: Set of two wristwatch size mainspring winders, handle unscrews to wind up mainspring, six sizes in total ranging from 6.0 to 9.75mm; $25/pr. |
#95874X Band Gauge/Spring Bar Tool: Band gauge, knife style opener and spring bar tool all combined in one; $6. |
#95866X Movement Gauge: Does both American and Swiss sizes; $8. |
#95865 Pocketwatch Key Set: Set of keys, #1 through #12, some are brand new; $25/lot. |
#95855 Miller Set: Miller/cutter set, in original wooden holder; $6. |
#95853 Steel Burnishers: Lot of two steel burnishers; $19/pr. |
#95831 Escape Wheel Tool:
Wheel is placed in appropiate spot, arms are swaged to make it flat and true; $25. |
#95819X Mainspring Winders:
Wristwatch size by Watchcraft, with original container; $49. |
#95803X Hammer:
Jeweler's hammer, brass head, about 8" long; $10. |
#95797 Oilers:
Lot of three dip style oilers; $6. |
#95796X Hand Broach:
Used to hold hands while broaching, pocketwatch size; $25. |
#95792X Rolex Tool:
Factory Mico-Stella tool for timing balances in all 12 1/2 ligne Rolex watches without removing the balance; $79. |
#95775 Tweezers: Swiss #1 tweezers, excellent tips; $19. |
#95773X Hairspring Tweezers: Dumont #7E curved tweezers for hairspring work, excellent tips; $25. |
#95772X Hairspring Tweezers: Swiss #7E curved tweezers for hairspring work, excellent tips; $19. |
#95770 Hairspring Tweezers: Swiss #7 curved tweezers for hairspring work, excellent tips; $19. |
#95768 Dumont Tweezers: Buy quality and only buy it once, #3, 3C & 5 Dumont Tweezers, excellent tips, handles might need a bit of cleaning up; $29/set. |
#95760 Tweezers: #4 Favorite tweezers, excellent tips; $15. |
#95759X Tweezers: #3C stainless tweezers, excellent tips; $15. |
#95758X Tweezers: #3c Dumont tweezers, excellent tips; $15. |
#95757X Tweezers: D tweezers, used for cutting hairsprings; $12. |
#95756X Tweezers: Used to hold hands while reaming/broaching; $12. |
#95754 Tweezers: Brass pivot straightening tweezers; $12. |
#95752X Tweezers: Pivot straightening tweezers; $15. |
#95751X Tweezers: #3 tweezers, excellent tips; $12. |
#95750 Bulova Strap Tool: From Bulova and designed to adjustable size of Accutron straps but should work on all metal straps, with instructions; $25. |
#95708 Parts Holder:
Spring loaded, push to open tongs, easy to pick up and place small parts; $4. |
#95702 Collet Lift:
Lift them off safely; $5. |
#95686X Sleeve Wrench:
K&D six prong sleeve wrench, no damage, for smaller watches, minor surface rust; $3. |
#95668 Screwplates:
Lot of three screwplates, each one has some plugged holes, speciallly prices at $25/lot. |
#95667 Screwplate:
Nice screwplate, no plugged holes; $19. |
#95666 Screwplate:
Nice screwplate, no plugged holes; $19. |
#95664 Trueing Calipers:
Complete with bending wrench; $19. |
#95663 Trueing Calipers:
Complete with bending wrench; $19. |
#95662X Trueing Calipers:
Old brass "simple" style; $2.
|
#95661 Trueing Calipers:
Complete with bending wrench; $19. |
#95660 Trueing Calipers:
Complete with bending wrench; $19. |
#95657 Poising Tool: Swiss made poising tool, adjustable legs, perfect jaws, note that bubble is not working; $29. |
#95658 Watchcraft Poising Tool:
Watchcraft poising tool with original wooden storage box, needs a bit of cleanup....also has a small chip on
one edge, still perfectly useable; $19.
|
#95656 Levin Poising Tool: In original fitted box, adjustable legs, jaws have a couple of nicks, but this unit is perfectly useable; $25. |
#95654 Poising Tool: In original fitted box, adjustable legs, perfect jaws; $19. |
#95653X Poising Tool: In original fitted box, adjustable legs, perfect jaws; $25. |
#95599X Graver Sharpener: Graver/screwdriver sharpener, holds the tool against the stone at the right angle; $25. |
|
|
#95585 Pallet Warmers: These things came in a million different styles/variations, here's one of them; $12. |
#95584 Pallet Warmer: These things came in a million different styles/variations, here's one of them; $12. |
#95583 Pallet Warmer: These things came in a million different styles/variations, here's one of them; $12. |
#95581 Pallet Warmer: These things came in a million different styles/variations, here's one of them; $12. |
#95580 Pallet Warmer: These things came in a million different styles/variations, here's one of them; $12. |
#95579 Pallet Warmer: These things came in a million different styles/variations, here's one of them; $12. |
#95577 Pallet Warmer: These things came in a million different styles/variations, here's one of them; $12. |
#95576 Pallet Warmer: These things came in a million different styles/variations, here's one of them; $12. |
#95575 Exacto Knife: Lot of two Exacto knifes with spare blades; $4. |
#95548 Oiler: Aluminum oiler with large "flat"; $4. |
#95526X Paper for Timing Machine:
New roll of timing paper 2 3/8" wide and 3" diameter, don't know which machine uses this size, note this is not for impact (carbonless) printing, it is used
on machines that still use a ribbon; $3.
|
#95525X Paper for Timing Machine:
New roll of timing paper 1 3/8" wide and 3" diameter, for Vibrograf B200, note this is not for impact (carbonless) printing, it is used
on machines that still use a ribbon; $6.
|
#95496 Mainspring Barrel Pliers: Used to punch holes in mainspring barrels; $15. |
#95495 Mainspring Barrel Pliers: Used to punch holes in mainspring barrels; $15. |
#95494X Pocketwatch Pliers: Speciality pliers to bend/form edges of pocketwatch cases; $25. |
#95493X Bow Opening Pliers: Used to safely open and remove pocketwatch bows; $15. |
#95488X Cutting Pliers: A bit of wear of the finish, but excellent tips; $10. |
#95482X Hand Broaching Tongs: Used to hold hands while broaching; $8. Another picture here . |
#95481X Tongs: Dog nose sliding tongs; $8. |
#95477 Mainspring Pliers:
Used to punch holes in mainsprings, includes punch for barrel; $25.
|
#95475X Hand Broaching Pliers:
Used to hold hands while broaching, with sliding lock; $15.
|
#95474 Hand Broaching Pliers:
Used to hold hands while broaching, with sliding lock; $10.
|
#95472 Pocketwatch Bow Pliers: Special notched pliers to safely and uniformly open pocketwatch bows; $25. |
#95467X Calendar Crystal Gauge: In addition to size of crystal, shows the size and position of magnifier for the date; $2. |
#95401 Roller Remover: K&D "duplex" style, note it has very minor surface rust; $19. |
#95400X Roller Remover: In my opinion the best kind, Rex roller remover set in original wooden box, does all sizes, can be used on a bench block on in your staking set; $39. |
#95399 Roller Remover: With extra tip (in storage slot on side), will do all sizes; $29. |
#95398X Roller Remover: Plunger style roller remover; $19. |
#95397X Roller Remover: Hand held roller remover; $8. |
#95396 Roller Remover: Plunger style, needs some clearning up, specially priced at $5. |
#95394 Roller Remover: Roller remover with stand and three punches, will do all sizes; $25. |
#95393X Roller Remover Stakes: Set of three stakes for Rex style or Marshall roller remover, note these will NOT fit the small set...these are about 4.7 mm in diameter; $12/set. |
#95391X Hand Remover: Hand remover, good condition; $10. |
#95389X Hand Remover: Plunger style; $10. |
#95388 Hand Remover: Clock type; $6. |
#95386X Bench Block: Bench block, round; $8. |
#95385X Bench Block: Bench block, with V slot; $12. |
#95383X Bench Block: Bench block, with V slot; $15. |
#95382X Bench Block: Bench block with V slot; $12. |
#95379X Elgin Tool: Inserting/removing tool from Elgin for Dura Power Shock Saver Springs; $6. |
#95364 Loupe: Plastic, estimate 10K; $10. |
#95338 Roller Jewel Gauge: Roller jewel gauge set in original fitted box, orginally had some vials with jewels, but this is the gauge set only, no vials or jewels; $39. |
#95265X Automatic Oiler Replacement Part: NOS Bergeon #2719D tube for automatic oiler #2A; $4. |
#95264X Automatic Oiler Replacement Part: NOS Bergeon #2720D tube for automatic oiler #5; $4. |
#95263X Douzieme Gauge:
This is the way the old guys did it, scaled in 1/12th ligne, about 6" long; $8. |
#95219 Blower: Hand blower, rubber with curved tube end; $15. |
#95218 Blower: Hand blower, rubber; $8. |
#95217 Blower: Hand blower, plastic; $8. |
#95216 Blower: Hand blower from Bergeon, $15. |
#95215 Blower: Hand blower, aluminum, would have had a tube type extension which is missing, but functions fine, specially priced at $4. |
#95214X Blower: Hand blower, aluminum; $8. |
#94996 Movement Holder: Stackable set, both wrist and pocketwatch sizes; $19. |
#94993 Movement Holder: Very versatile, adjusts for any angle/size of movement; $19. |
#94991 Pocketwatch Movement Holder: Adjustable pocketwatch movement holder; $25. |
#94990 Movement Holder: For wristwatches, two sided; $6. |
#94989X Movement Holder: For wristwatches, four sided; $6. |
#94988X Movement Holder: For wristwatches, two sided; $6. |
#94983 Movement Holder: Wristwatch movement holder, spring loaded; $4. |
#94982 Movement Holder: Wristwatch movement holder, spring loaded; $4. |
#94981 Movement Holder: Wristwatch movement holder, spring loaded; $4. |
#94980 Movement Holder: Wristwatch movement holder, spring loaded; $4. |
#94977 Movement Holder: Wristwatch movement, spring loaded, adjustable; $6. |
#94976X Movement Holder: Wristwatch movement holder from Mido, adjustable; $4. |
#94974 Movement Holder: Pocketwatch sizes, one for 16S, 14S and 12S; $12. |
#94973 Movement Holder: Lot of four, one 18S and three wristwatch sizes, all wooden, all signed Waltham; $15. |
#94972 Movement Holder: Lot of five, wristwatch and small pocketwatches; $8. |
#999 Home Study Watchmaking Course: Originally we printed this for a few customers and made a few extras; the demand was so high we just had some more done. Produced by the Chicago School of Watchmaking in 1952, long since out of business. Thirty five lessons, about 1000 pages (that's right 1000!), extremely well written and profusely illustrated. First generation copy, not done at the local library's xerox machine but rather laser copied by a printer, each lesson bound. Two of the chapters (NOT incomplete) are slightly out of sequence, exactly the same as the original. We don't normally hype the stuff we sell, especially as in this case where there is almost no profit, but if you ask around you will find how highly people speak of this course. Whether you are a hobbyist wanting to do your own service work or have an eye towards a future part or full time occupation, if you follow the course and do the practise work, you cannot lose! $169 includes surface postage within North America. |
#94877 Zenith Cleaning Machine:
Four jar cleaner by Zenith, complete with jars/lids and basket assembly, reverse, heater, in good working order; $129.
Note, this machine was tested prior to purchasing, and then to remove it was necessary to cut off the power plug (the wire was
routed behind a bench). It is in good running order and can be shipped as is, or if you prefer we can delay shipping by a few
days to install a plug and retest. (Also available for $99 picked up.)
Surface shipping, continental US only is $40.
Another picture here .
|
#94876 L&R Cleaning Machine:
Three jar cleaner by L&R, complete with jars/lids and small basket assembly, reverse, heater, in good working order; $129.
Surface shipping, continental US only is $40. (Also available for $99 picked up.)
Another picture here .
|
#94875 L&R Cleaning Machine:
Three jar cleaner by L&R, complete with jars/lids and small basket assembly. Note that the original rheostat was burned out, and
replaced with 110V light switch style dimmer...which works fine; $89. Surface shipping, continental US only is $40.
(Also available for $69 picked up.)
Another picture here .
|
#94813 Basket Assembly:
Basket assembly for three jar L&R cleaning system, 2 1/4" diameter; $25.
|
#94812X Cleaning Jar Lids: L&R embossed non screw style lids; $8. |
#94811X Cleaning Jar: Marked "Atlas", about 3 5/8" square, w/lid, will fit Zenith machines, three pieces available, note they might be stained from fluid left in over time; $19 each. |
#94810 Cleaning Jar: About 4" square, no lid; $15. |
#94809 Cleaning Jar: About 3 1/2" square, no lid, small chip on top; $15. |
#94808 Divider: For L&R 3 basket cleaning system, divider for large basket assembly (2 3/4" diameter); $2. |
#94807 Basket Lid: For L&R 3 basket cleaning system, mesh lid for large basket assembly (2 3/4" diameter); $2. |
#94806X Basket Tray: For L&R 3 basket cleaning system, large basket tray w/2 small containers (2 3/4" diameter); $3. |
#94805X Basket Tray: For L&R 3 basket cleaning system, large basket tray (2 3/4" diameter); $2. |
#94804X Tiny Basket: For L&R 3 basket cleaning system, small parts baskets about 3/4" diameter and 1/2" deep, fits in either basket size; $1 each or 6 for $5. |
#94803 Basket Mount: For L&R 3 basket cleaning system; $5. |
#94802X Basket Lid: For L&R 3 basket cleaning system, small basket lid, mesh. (2 1/4" diameter); $2. |
#94801 Basket Lid: For L&R 3 basket cleaning system, small basket lid, solid, (2 1/4" diameter); $2. |
#94800X Basket Insert: For L&R 3 basket cleaning system, small basket insert (2 1/4" diameter); $2. |
#97417 Levin Pivot Polisher: Quality at its best, Levin pivot polisher with slotted mounting bracket for your lathe (use bolt from tool rest); $79. |
#97416 Levin Balance Chucks: Quality at its best, set of Levin balance chucks, used for polishing pivots without taking the balance apart, one for pocket and one for wristwatches, in original storage box (note top is broken off); $89. |
#97415 Milling Attachment: Milling attachment for ww lathes, includes accessory chuck (brass tip is just a protective cap for storage purposes) and a total of three drawbars (all 8mm) to accomodate any accessory/collet options (different lengths so they will draw up tight), overall very nice condition. Maker unknown; $775. Lots more pictures here , here , here and here . |
#97403BX Steel Burnishers: Double ended steel burnisher with caps; $29. |
#97381 Lathe Material: Assortment, both brass and steel; $8. |
#97380 Lathe Material: Assortment, both brass and steel; $8. |
#97347 Lathe Tool Lot: Everything you need to get started cutting....aluminum graver holder with one tip (friction fit), sharpening stone and sharpening tool that holds graver at correct angle (also works for screwdrivers); $29. |
#97276 Bur Lot: Large lot of dental burs, some dirty, some surface rust; $8/lot. |
#97274 File Rest: Lathe file rest; $39. |
#97273 Arbors: Lot of four accessory arbors with screws; $4/lot. |
#97270 Collet Set: Starter collet lot, all 8mm, assorted makers, sizes 4, 6, 8, 10 & 12; $25/lot. |
#97269 Sanding Discs: A whole bunch of them, double sided; $4/lot. |
#97268 Lathe Material: Nice lot of (mostly solid) assorted steel material; $8. |
#97267 Lathe Material: Nice lot of (mostly solid) assorted steel material; $8. |
#97266 Lathe Material: Nice lot of (mostly solid) assorted steel material; $8. |
#97265 Lathe Material: Nice lot of (mostly solid) assorted steel material; $8. |
#97262 Diamond Tube: Two pieces, brand new from Smit, about 15mm long x 10.6mm wide, hole diameter is about 6.75mm; $10. |
#97232 Collet Storage Box: Outside shows some wear but very solid, inside very good, for 8mm collets; $39. Another picture here . |
#97224 Graver Holder: Aluminum graver holder, friction fit (about 2.45mm square), one tip included; $10. |
#97220 Collet Box: Collet storage box for 8mm collets; $25. Another picture here . |
#97219 Lathe Material: Assortment, mostly brass but some steel; $8. |
|
#97217 Arbor: 8mm arbor with screw out tip for other accessories, includes stone wheel as shown; $19. |
#97206 Cone Center: Shaft diameter is 3.8mm, picture show cone details; $8. |
#97186X Lathe Belting: New lathe belting, spring steel, 20" long, 2.5mm diameter; $12. |
#97185 Lathe Belting: New lathe belting, fibre, 12" long, 3mm diameter; $8. |
#97184X Lathe Belting: New lathe belting, fibre, 20" long, 3.2mm diameter; $12. |
#97183 Lathe Belting: New lathe belting, rubber or synthetic, 48" long, 4.5mm diameter; $19. |
#97182X Lathe Belting: New lathe belting, rubber or synthetic, 12" long, 4mm diameter; $8. |
#97181 Lathe Belting: New lathe belting, rubber or synthetic, 36" long, 4.75mm diameter; $15. |
#97180 Lathe Belting: New lathe belting, rubber or synthetic, 36" long, 3mm diameter; $15. |
#97179X Lathe Belting: NOS 12" length of leather lathe beltings; $4. |
#97178X Lathe Belting: NOS 36" length of leather lathe beltings; $8. |
#97175 Saws: Assortment of saws with various sizes of arbor, with extra blades; $25/lot. |
#97174 Lathe Motor: In running condition, but MUST be rewired before using; $25. |
#97173 Collet Holding Tailstock Lathe: Nice Marshall 8mm lathe, indexing headstock, tip over tool rest and collet holding tailstock. Takes standard 8mm collets, none included, mounted on Borel aluminum stand for convenient "push out of the way when not in use". Pretty nice finish, tight and true; $389. No motor or pedal included. More pictures here and here . |
#97171 Foot Pedal: Adjustable speed foot pedal, with 110V receptacle to plug in your motor, and wall plug, nice condition; $39. |
#97164X Pulley: Pulley, about 15.8 long, 18.9mm wide, actual width of pulley section 11.6mm and id of shaft is 6.2mm; $5. |
#97163 Peerless Lathe: Very nice Peerless 8mm lathe, indexing headstock, tip over tool rest and standard tailstock. Takes standard 8mm collets, none included. Very nice chrome finish, tight and true, ready to go to work; $279. More pictures here and here . |
#97146X Waller Tip Holder:
Waller screw in tip holder, no tip; $3. |
#97145 "V" Holder: Has taper shaft, from 3mm to 4.8mm, brass "V"; $15. |
#97073 Lathe: Standard 8mm lathe, indexing headstock (there is no pin, if you order this remind me to look, I am sure I have some someplace), tip over toolrest, standard tailstock....even has the drive belt. Just add your motor and away you go, excellent chrome finish; $249. More pictures here , here and here . |
#97064X Balance Chuck: Used to polish pivots on balance complete without removing staff, pocketwatch size; $19. |
#97032 Balance Chuck: Used to polish pivots on balance complete without removing staff, pocketwatch size; $29. |
#97031 Box Chuck: Large (ID is 1/2") style box chuck from Starret, 8mm; $39. |
#97030 Cement Brasses: Huge lot of cement brasses, largest is 2" in diameter, screw style, with 8mm adapter chuck; $59. |
#97029 Polishing Tools: Two (one soft and one hard) pollishing heads, screw style, with 8mm adapter chuck; $29. |
#97027 Wheel Chucks: Numbers 1 through 4, 8mm, assorted makers; $39. |
#97023 Barkus Lap: High quality #4 Barkus lap, used to sharpen carbide gravaers, requires #50 collet; $29. |
#97022 Wheel Chucks: Set of wheel chucks, numbers 1 through 7, plus #10, assorted makers, 8mm; $99. |
#97018 Three Jaw Chuck: Three jaw chuck, standard 8mm, has plastic head and jaws, plus extra set of jaws, overall nice condition; $99. |
#97017 Compound Slide: Very nice cross slide, fits standard 8mm ww pattern lathes (use shoe bolt from your toolrest), excellent chrome finish. Can't find any makers name on it, but appears nice and tight with no absue; $399. More pictures here , here and here . |
#96079 Jewel Chucks: Set of five jeweling chucks; $19. |
#96021 Centering Back Rest: Complete with bolt for the lathe bed, nice condition; $99. |
#96020 Accessory Adapter: 8mm accessory holder, 'square' is 7mm; $25. |
#95958 Cement Brasses: Lot of four cement brasses with 8mm collet to hold them; $25. |
#95956 Cement Brasses: Lot of four cement brasses with 8mm collet to hold them; $25. |
#95955X Center Collet: Dead center collet, 8mm; $9. |
#95927 Cement Brasses: Lot of three cement brasses with 8mm collet that holds them; $25. |
#95837 Jacot Tool:
Original wooden box (no key) in pretty good condition, has drawer for burnisher storage, complete with
bow and gauge, note that one lantern is missing; $99.
More pictures here and
here. |
#95554 Crocker Graver Sharpener: In very nice condition with original box and instructions; $79. Second picture here . |
#95540 Lathe Bed: Boley lathe bed (only) with post and nut, some wear of the finish; $25. |
| #990 8mm Lathe Collets: This item changes frequently with new collets being added, so be sure to check back if you don't find the sizes you are looking for. Various makers, no damage, some might have bit of minor surface rust, following sizes available: 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 (brass), 12, 14, 16, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 31, 32, 33, 35, 37, 38, 40, 42, 44, 46, 50; $10 each. The following sizes available at $20 each: 51, 52, 54, 55, 56, 58, 60, 62, 64, 65, 66, 68, 69, 70, 71, 72, 73, 74, 76, 77, 78, 79. |
| #991 Marshall 8mm Lathe Collets: Note that these are Marshall collets, even though they are not stamped with the makers name. They should fit all standard 8mm lathes (Rivett, Derbyshire 'fat', Mosely 'long' excluded), however they are slightly longer. The typical collet is about 34 or 35mm o/a, these are about 40mm o/a in length. We tested these on various lathes with no problems, but if you are not sure we recommend that you check your headstock drawbar first....you can put a spacer that is about 4mm long on any collet (or simply hold the collet out with your fingers) to make sure that your drawbar will 'grab' the collet. It is your responsibility to insure that they fit your particular lathe. Be sure to specify "991 Marshall" when ordering this item. The following sizes available at $10 each: 1, 2, 3, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 28, 30, 33, 34, 35, 36, 37, 38, 42, 47, 50. The following sizes available at $20 each: 52, 54, 55, 56, 65, 69, 70, 71, 72, 73, 74, 76, 77, 78, 79, 80.. |
#97431 GS Waterproof Crystal Tool: By GS, hand press with full set of dies, original wooden box with instructions and gauge, very nice condition; $79. Instruction picture here . |
#97382 Jaxa Case Opener: My favorite, will open just about anything, this is the real Jaxa, not the offshore version; $49. |
#97353 Case Opener: Suction style case opener; $6. |
#97353 Case Opener: Devries case opener, heavy duty and adjustable, very rugged; $15. |
#97335 LG Opener: Similar to the Jaxa opener, this unit will open just about anything. It is adjustable, and although it would normally come with a set of 12 dies it just has the three that are inserted in the unit....however, this will still do most cases. Very rugged; $25. |
#97310 Bergeon Air Pump: Used for "blowing" out crystals, in excellent condition with extra tip; $49. |
#97279 Case Opener: Knife style case opener; $6. |
#97278 Case Opener: Adjustable case opener for waterproof case backs; $12. |
#97277 Case Pliers: Speciality pliers for opening waterproof case backs; $19. |
#97221 Crystal Cement: GS crystal cement (requires UV to set), one brand new plus a partial; $10. |
 |
